Marineshaver™ Pro

**** If you are interested in a Drum type gelcoat peeler, check out our new Gelpeel™ Pro. ****

If you are outside the USA, the shipping that we charge does not include tariffs, duties and import taxes. Those are costs imposed by your Government.

Note: The Marineshaver™ and the Paintshaver® are the same tool with the exception of the blades. The Paintshaver® comes with Tungsten Carbide blades and the Marineshaver™ comes with Diamond blades. The Marineshaver™ Pro is available in a 240 Volt version if you are outside North America. Click here for our 240 Volt Marineshaver™ Pro

The Marineshaver™ Pro strips gelcoat and anti-fouling paint from fiberglass power and sail  boats and paint from wooden boats at a rate of 1 square foot in 20 seconds. You can strip the gelcoat from a 30 foot boat in about 6-8 hours. It will also strip coatings from concrete and steel surfaces. Works on large curved surfaces like boat bottoms.

The ecologically safe Marineshaver™ Pro with dust-collector allows retrieval of the stripped debris into a wet/dry or HEPA vacuum.

The Marineshaver™ Pro comes standard with our New Diamond Tipped Blades which are designed for harder gelcoat and epoxy coatings.

The Replaceable Diamond Tipped Blades do not generate excessive heat and will last up to 2000 square feet on gelcoat and anti-fouling paint and up to 200 square feet on concrete and steel.

The Marineshaver™ Pro eliminates the need for dangerous chemicals and sandblasting. Abrasive grinding of gelcoat creates heat that could damage fiberglass laminates and substrates.

The depth of cut is fully adjustable from 0 to .100” (2.5 mm).

The Marineshaver™ Pro is portable, lightweight, inexpensive to operate and can be used indoors and outdoors.

Specifications: 12 Amp Motor: 120 Volts, 1300 Watts, Variable Speed 2800-11,500 RPM, 5.75 lbs., 2.7″ cutter width, 0-.100″ depth of cut, Lifetime Warranty, Soft Start Motor with Anti-KickBack Protection.

The Marineshaver™ Pro stripping gelcoat from a fiberglass boat bottom

Need 240 Volts? The Marineshaver Pro is Available in a 240 Volt Version for countries outside North America that require it. Click the link below to order.

*** Click here for 240 Volt Marineshaver ™ Pro specs and ordering information ***

 CLICK LINK FOR MARINESHAVER PRO INSTRUCTIONS – https://paintshaver.com/pages/marineshaver-pro-instructions

Shop Marineshaver™ Pro!